How to Fit Kitchen Upstands and Back Panels
Difficulty
4/10
Time
1-3 hours
Tools
Saw / adhesive / sealant / tape
Upstands finish the join between wall and worktop
Upstands and back panels protect the wall and tidy the edge of a kitchen. Accurate cuts and sealant control matter more than speed.
Steps
- Clean and dry the wall and worktop.
- Measure each run separately because walls are rarely perfect.
- Dry fit before adhesive.
- Use the recommended adhesive for the material.
- Seal wet areas neatly, especially near sinks.
Safety note
Check manufacturer guidance around hobs and heat sources before fitting panels behind cooking areas.